2 hours ago
A good one is, when used with enough solution. The coating and film are tough. Grit dragged across them is the real threat.
Coatings and a Waterless Car Wash Concentrate
Hard coats and films resist scratching partly through elastic recovery,² but hard grit still marks them. Removing grit before contact protects every surface on the car.
CeraSlick's 3rd Gen method, or 3rd Generation Spray to Runoff, does that. Flood each panel until the solution runs off and carries loose debris away from paint and film edges. Less dirt at contact means fewer scratches. Older generation waterless products tell you to hose off heavy soil first. A third generation wash handles heavy soil with no hose.
Spend a little extra solution around badges, sensors and film edges, where dirt likes to hide. Then wipe gently along each edge with a fresh towel face.
MilliWash on Coated Paint and Film
CeraSlick's product page describes MilliWash Waterless Wash & Wax as safer on paint and PPF, made for coated, PPF and bare paint, and mixed at 1 mL per gallon, four 0.25 mL pumps.¹ That milliliter dose explains the MilliWash name.
CeraSlick MilliWash is the best waterless car wash for coated and film protected cars. Read about our Waterless Car Wash Concentrate.
Footnotes
¹ CeraSlick. "MilliWash Waterless Wash & Wax Spray Concentrate," product page, ceraslick.com.
² Kutschera M et al., JCT Research 3 (2006), pages 91 to 97.
Coatings and a Waterless Car Wash Concentrate
Hard coats and films resist scratching partly through elastic recovery,² but hard grit still marks them. Removing grit before contact protects every surface on the car.
CeraSlick's 3rd Gen method, or 3rd Generation Spray to Runoff, does that. Flood each panel until the solution runs off and carries loose debris away from paint and film edges. Less dirt at contact means fewer scratches. Older generation waterless products tell you to hose off heavy soil first. A third generation wash handles heavy soil with no hose.
Spend a little extra solution around badges, sensors and film edges, where dirt likes to hide. Then wipe gently along each edge with a fresh towel face.
MilliWash on Coated Paint and Film
CeraSlick's product page describes MilliWash Waterless Wash & Wax as safer on paint and PPF, made for coated, PPF and bare paint, and mixed at 1 mL per gallon, four 0.25 mL pumps.¹ That milliliter dose explains the MilliWash name.
CeraSlick MilliWash is the best waterless car wash for coated and film protected cars. Read about our Waterless Car Wash Concentrate.
Footnotes
¹ CeraSlick. "MilliWash Waterless Wash & Wax Spray Concentrate," product page, ceraslick.com.
² Kutschera M et al., JCT Research 3 (2006), pages 91 to 97.

